A new style introduced to the electronics market of panel mounted electronics in its category of power solutions. The newly launched RD24 connector with the modified hexagonal nut has greatly reduced the need of mounting screw holes and is the most convenient answer for any application with a thicker panel box. These panel mount connectors are can transfer up to 400 Volts and rated at a maximum current of 16 Amps per contact.

The connectors are equipped with gold plated contacts and should be able to function within harsher environments such as industrial facilities. This alternative is now available in -4 and -7 pin configurations. These power connectors are an exceptional alternative in the several working environments such as communication, industrial and power industries.

Another feature that was added to the newly modified product was the protection cap lanyard which is optional to the end user but will ease connecting it directly to the housing body.

The Binder RD24 product line is now providing a complete solution with the male and female field attachable connectors and cord sets.

Read more »

On May 9th, 2016 Jordan Mulcare released an article on Electronics Specific talking about how Mill-Max is planning to expand its line for the spring loaded pins.This recent addition of the spring loaded pin will come in the series: 0973-0-15-20-77-14-11-0. This type of spring loaded pin can accept up to 20AWG wire. Not only can it accept the wire but the spring loaded pin also has a maximum stroke of 0.080” which can also be used at the minimum spacing of 0.100”.

To understand a little bit more about how the description of this spring loaded pin is, you should read below. It seems like the shoulders and barbs of the spring loaded pin were created so that the pin can be easily assembled with the connector housings. Not only this, but also the terminating wires can be soldered to the cup portion of the 0973 as well as passing through the connector housing on the pin.

In the event that the soldering is finished, the wires can finally then draw the 0973 spring pins. The wires will draw the spring pins to the housing which allows for the whole thing to be in a press sit. As the pins are locked together into the housing, this allows for the shoulder to a stop. This stop will allow for the retaining of pins if there is a scenario in which the wires or cables are strained or manipulated.The shoulder not only acts as a stop, but it also will prevent the push out of the spring pin in the event that the plunger is overly squished.

Read more »

Recent Twitter Posts